Greater Houston
Commercial & Industrial Spray Foam in Houston, TX
Metal buildings, tilt-wall shells, conditioned offices inside hot warehouses—Houston facilities battle extreme sun, humidity, and long cooling seasons. Phantom Foam designs and installs commercial and industrial spray polyurethane foam (SPF) systems that control heat gain, air infiltration, and condensation at the source. We help stabilize indoor conditions for people and processes, reduce energy
Commercial FAQ
Insured • Site-specific JHAs • Night/Weekend options • Clean, documented close-out
Stop Heat, Humidity & Condensation Where They Start
Steel is fast to erect—yet it also conducts heat and can sweat when humid Gulf air meets cooler interior surfaces. Conventional insulation can slow conduction but rarely air seals a building full of purlins, laps, penetrations, and irregular cavities. Spray foam bonds to metal, wood, or masonry, creating a continuous thermal and air boundary that reduces roof deck heat, limits moist air infiltration, and helps prevent condensation over product, packaging, and floors.
Open-Cell, Closed-Cell, or Hybrid—Specified to the Operation
Open-cell foam is lighter and expansive—excellent coverage and acoustics for large volumes and office build-outs. Closed-cell foam delivers higher R-per-inch and a rigid, moisture-resistant layer for metal panels, rim joists, coolers/freezers, and exterior walls. Many facilities benefit from a hybrid strategy that balances cost, performance, and drying paths—paired with coatings and barriers tailored to code and use.
Where We Add the Most Value
Interior foam reduces peak roof temps and surface condensation; rain gets quieter and summer heat stops radiating into work areas.
- Metal Roofs & Panels
- Tilt-Wall / CMU
- Coolers & Freezers
- SPF Roof Systems
- Mechanical / Process Areas
- Sound & Partition Control
- Heat Load Visualizer
- Houston Summer (Roof 140–150°F)
Frequently Asked Questions
Can you work without shutting our operation down?
Often, yes. We phase by bay, isolate areas, and offer night/weekend crews. For food or pharma, we align with QA to meet sanitation and air-quality requirements.
Which foam is best for metal buildings?
Closed-cell is usually preferred for higher R/inch and rigidity with improved moisture resistance. We confirm thickness and barrier requirements by assembly and code.
Will foam stop roof condensation (“sweating”)?
Foam reduces interior surface temperature swings and uncontrolled humid air contact, mitigating sweating. We also treat laps, penetrations, and bridges that cause drips.
Do you restore existing roofs with SPF + coatings?
Yes. SPF adds insulation and can correct minor slope issues; elastomeric coatings provide UV/weathering protection. Substrate condition is evaluated first.
What about fire ratings and code approvals?
We specify assemblies with required ignition/thermal barriers or intumescent coatings based on location and occupancy. Submittals and product data are provided.
Serving Greater Houston
Get a Free Estimate
Licensed, insured, and 0% interest financing available. Monday through Saturday scheduling.